| Superior polishing efficiency | | Since it doesn’t crack, high polishing efficiency can be achived when using it xith ultrasonic, air, electrical tools. | | Due to high ALF contents (up to 85%) high density and continuous cutting edges, superior polishing performance continues. |
| As it breaks easily, not suitable for the use with ultrasonic, air, or electrical tools. | | Abrasive grain makes up only 30% total weight. | | Due to grain fall out, grinding performance is unstable and tool life is short |
No clogging Thanks to the self –sharpening action, it resists clogging. Self-sharpening; ALF gradually cleaves by itself and generates new cutting edges, even though binders are consumed during polishing. New cutting edges are generated after grain fall out.However, abrasive grains clog the blank holes created when the grains fall out .Easily clogged. Uniformed fine finishing Thanks to the even diameter of ALF, surface roughness of the finished surface is superior. Due to the variation of abrasive grains diameters, uniform finishes are difficult to achieve.. No chipping Thanks to the continuous ALF, grains do not fall out and no scratching occurs. Scratches are caused on the finished surface by fallen out grains. Usage, Applications 用途及應用范圍 | | ■Usage 用途Ideal for precise polishing of free surfaces, free curves, ribs, bosses, etc., of various forming molds (especially plastic mold).High finishing efficiency can be achieved without clogging, even for metals such as aluminum, copper, gun metal, etc., which clogs with common abrasive stones.Can be used in narrow areas where common abrasive stones cannot be used because of breaking.Use on complex shapes where uniform finishing could not be previously attained.Efficient EDM scales removal.陶瓷纖維油石(俗稱超級油石)系將高純度之陶瓷纖維與熱塑性樹脂結合制造而成,具有高硬度、耐磨耗及不易折斷的特性。除可用于手持研磨外,且適用于氣動、電動往復式研磨機。在超音波振動研磨機上使用,效果最佳。陶瓷纖維油石可在各種不同材質的模具鋼上研磨加工。最適用于一般難研磨加工處,如窄溝壁、溝底、孔、滑痕、肋部及微小精細處。尤其對于放電加工后積碳層的快速去除及拋光效果更佳。 | |
■Applications 應用范圍| Usage | Meister Finish (Stick type) 平板型 | Meister Finish (Rod type) 圓棒型 |
|---|
| Die and Mold Finishing | Removing EDM scalesPolishing precise areaFinishing ribsFinishing edges, corners[Target]For resin, rubber, die castings etc. (Softer than HRC57) | Removing EDM scalesPolishing precise areasFinishing edges, corners to be roundedFinishing bossesFinishing runners, sprues and sub-gates[Target]For resin, rubber, die castings etc. (Softer than HRC57) | | Deburring | | Deburring parts for communication and optical instrumentsFine deburring of nozzleDeburring edges of cutting tool blades .Fine deburring after machine processing | | Others | | For dental molds (2.34)For metal-curving |
Comparison 對比 | | ■Performance Comparison with Competitors (SS) |
| | The most widely used SS product is “Blue”. (60% of all SS products) Please refer to the line graph.Users of S‘s “Blue” use it to achieve surface roughness shown byThe same degree of surface roughness can be achieved by XEBEC’s “Orange”For the user to achieve this surface roughness using S’s “Blue” would result in the finishing removal rate shown in bar graph;Using XEBEC’s “Orange” would result in bar graph,making it 4 times more efficient in polishing. |
Use | | ■Meister Finish (Stick type) 平板型 | |
|
|
|